22 Genie GS-2668 RT & Genie GS-3268 RT Part No. 82233
Operator's Manual Second Edition ยท Third Printing
Operation From Platform
1 Turn the key switch to platform control.
2 Pull out the ground and platform red Emergency
Stop buttons to the position.
3 Start the engine.
To Position Platform
1 Move and hold a function enable/speed select
switch.
2 Activate the platform up/down function toggle
switch in the desired direction of travel.
To Steer
1 Press and hold the function enable switch.
2 Turn the steer wheels with the thumb rocker
switch located on the top of the control handle.
To Drive
1 Press and hold the function enable switch.
2 Increase speed: Slowly move the control handle
off center.
Decrease speed: Slowly move the control
handle toward center.
Stop: Return the control handle to center or
release the function enable switch.
Use the color-coded direction arrows on the
platform controls and on the platform to identify the
direction the machine will travel.
Machine travel speed is restricted when the
platform is raised.
Drive Select Button
Machine on incline symbol:
Low range operation for inclines
OPERATING INSTRUCTIONS
Operation From Ground
1 Turn the key switch to ground control.
2 Pull out both ground and platform red
Emergency Stop buttons to the on position.
3 Start the engine.
To Position Platform
1 Push and hold the function enable button.
2 Activate the up function or the down function.
Drive and steer functions are not available from the
ground controls.
Engine Idle Select Switch
Low idle High idle
