A SERVICE OF

logo

9
3. Connect Your Enclosure To Your Computer:
a. Make sure the Power Switch on your Enclosure is in the OFF position.
b. Turn on your computer and wait for it to load.
c. Connect the USB Cable to the USB Port on your Enclosure, and then connect the other end to an available USB
port on your computer.
d. Connect the enclosed Power Adapter to the DC 12V Power Port on your Enclosure, and then connect the other
end to a power outlet.
e. Turn on the Power Switch on your Enclosure.
f. Your computer will detect your Enclosure and the necessary drivers will be installed automatically.