A SERVICE OF

logo

10. Attach the secondary support line if required, as shown below.
Secondary
Support Line
Secondary
Tie off Point
Figure 5. Attaching the Secondary Support Line
a. Remove the ceiling tile adjacent to the tile where the speaker is mounted.
b. Attach the secondary support line.
ATTENTION: Do not allow any slack in the secondary support line.
c. Replace the adjacent ceiling tile.
11. Pivot the tweeter to aim the mid and high frequencies to the desired spot, as shown
below.
Figure 6. Pivoting the Tweeter
ATTENTION: Thetweetercanbepivotedonly.Donotattempttorotatethe
tweeter.
SF 26X User Guide • Installation 10