Model 380974 V1.8 Sept 2003
3
Safety Information
• Read the following safety information carefully before attempting to operate or service
the meter
• To avoid meter damage, do not exceed the maximum specified input limits
• Do not use the meter if the test leads appear damaged
• Use caution when working near bare conductors or bus bars
• Accidental contact with a conductor may cause electrical shock
• Use this meter only as specified in this manual, otherwise the protection provided by the
meter may become impaired
• Read the operation manual before use and follow all safety instructions
• Use caution when working with voltages that exceed 60VDC or 30VAC, such signals
pose a shock hazard
• Disconnect circuits under test from the main power supply and disconnect all loads
before taking resistance, capacitance, and continuity measurements
• Environmental Conditions:
1. Installation Category III
2. Pollution Degree 2
3. Altitude 2000 meters max.
4. Indoor use only
• International Safety Symbols:
CAUTION:
Refer to
documentation
CAUTION:
Risk of
Ele ctrica l
Shock
Double
Insulation
