380395_380396-en-EU_V1.3 8/14
14
Maintenance
Battery Replacement
WARNING: To avoid electric shock, disconnect all of the test leads from the unit before
replacing the batteries.
Operating Caution
Do not mix old and new batteries.
Make sure the polarity is correct when installing batteries. Do not take measurements with the
battery compartment open.
Replace the batteries as soon as the low battery indication appears.
Do not use the tester
in a low battery condition.
1. Switch the meter off and disconnect all of the test leads.
2. Remove the four screws that hold the battery
compartment cover in place.
3. Remove the battery compartment cover.
4. Replace the eight (8) 1.5V batteries.
5. Replace the battery compartment cover and screws.
6.
You, as the end user, are legally bound (Battery ordinance) to return all used batteries and
accumulators; disposal in the household garbage is prohibited!
7. You can hand over your used batteries / accumulators at collection points in your community
or wherever batteries / accumulators are sold!
Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the
end of its lifecycle
Power Adaptor
1. The power adaptor input terminal is located at the top
left of the tester.
2. Ensure that the meter is powered off before inserting
the power adaptor into the input terminal.
3. It is highly recommended that all of the batteries be
removed from the meter before using the power
adaptor.
4. Ensure that the meter is powered off when the power
adaptor is disconnected from the meter.
