380395_380396-en-EU_V1.3 8/14
13
Peak Hold Function (AC/DC Voltage measurements only)
The PEAK HOLD function is used with the MAX/MIN function to capture voltage max and min peaks
in the range of 10 to 100mS (milliseconds). The voltage range is 0.5V to 600V AC or DC.
1. Press the MAX/MIN button. MIN will appear on the LCD display.
2. Press the PEAK button. MIN/PEAK will appear on the LCD display. The meter will now capture
minimum readings.
3. Press the MAX/MIN button again to display the MAX/PEAK icon. The meter will now capture
maximum readings.
4. Press and hold the MAX/MIN button for at least 2 seconds to exit the PEAK hold mode.
Relative Mode (AC/DC Voltage measurements only)
The relative mode displays the difference between the measured value and a stored reference
value.
1. Press REL to store the reading presently indicated on the display as the reference value; the
"REL" indicator will appear.
2. Subsequent readings will represent the difference between the stored reference value and the
measured value.
3. Press the REL button again to return to normal operation
