69
necessary to adjust the squelch, the squelch may be
adjusted using the following procedure:
The radio must be on a Conventional System or an
EDACS working Channel (i.e. receiving a voice call)
to adjust the squelch. It is recommended to adjust
squelch from a Conventional System.
NOTE
1. Press and hold the SHIFT/CLR/MONITOR button.
2. Use the or keys to adjust the squelch.
Pressing the will open the squelch and
pressing the will close the squelch.
SENDING A MANUALLY ENTERED INTERCONNECT
CALL
1. Select a channel in your radio system that has
telephone interconnect capability. The radio should
be programmed for DTMF operation on this channel.
2. Press and hold the PTT bar to key the transmitter.
3. While holding the PTT bar, press either the
key or the key as required by the radio system
to obtain a telephone line. The radio will transmit the
selected tone.
