Maintaining Your Product 61
3. Access the printer driver.
See “Accessing the printer driver” on page 14.
4. Click the Utility tab, then click the Print Head Alignment button.
5. Follow the on-screen instructions to align the print head.
Correcting the Printing Position
If you notice a misalignment of vertical printing position, you may be able to solve this
problem by using the Correcting the Printing Position utility in your printer driver.
Using the Correcting the Printing Position utility
Follow the steps below to adjust the vertical and horizontal printing position using the
Correcting the Printing Position utility.
1. Make sure that a dummy disc or blank with a 116 mm (4.57") or more outside diameter
is inserted in Stacker 1.
2. Make sure that no lights are indicating errors, and that the disc cover is closed.
3. Access the printer driver.
See “Accessing the printer driver” on page 14.
4. Click the Utility tab, then click the Correcting the Printing Position button.
5. Follow the on-screen instructions to adjust the vertical and horizontal printing position.
Cleaning Your Product
New :Inkjet Only.In case of SPC, use <H asei> parts.
Cleaning the exterior of the product
To keep your product operating at its best, clean it thoroughly several times a year by using
the following procedure.
