A SERVICE OF

logo

Publishing Discs 49
Taking Out Discs
Follow the steps below to take out the published discs from the stackers.
1. Open the disc cover, and take out the stacker.
2. Take out the published discs from the stacker. The output stacker differs according to
the publishing mode. Refer the following table.
3. Install the stacker in the product, and then close the disc cover.
Output stacker Mode Number of discs
Stacker 2 Standard mode
Batch mode
Up to 50 discs
Stacker 3 Batch mode Up to 50 discs
Stacker 4 Standard mode
External Output mode
Up to 5 discs
Stacker 2 Stacker 3 Stacker 4