Chapter 3
SelecType
The FX-286’s SelecType feature can produce nine special typestyles
and skip-over-perforation. The typestyles are:
This
is
condensed mode
This is double-width
This is elite mode
This is emphasized mode
This is italic type
This is double-strike mode
This is under line mode
This superscript
This is subscript
SelecType Operation
Using SelecType is easy. You turn on SelecType and select a type-
style, then turn off SelecType and print.
Note
For convenience, this chapter uses the yellow label names of
the buttons-OFF LINE, FORM FEED, and LINE FEED.
Turning SelecType on
1.
Make sure that the printer is on and that the POWER, READY, and
ON LINE lights are all on.
2. Press both the OFF LINE and FORM FEED buttons at the same
time, as illustrated in Figure 3-1. Hold them down for at least a
second, then release them.
3-1
