2-64
64 | Handling Paper and Other Media
Printing Trim Lines
You can print trim lines on the right edge of your pages (if you’re using auto
cut) or on the right and bottom edge (if you’re not using auto cut). Follow
these steps:
1. Press the
Menu button.
2. Press the
Menu button again to select the Printer Setup menu and
highlight
PLATEN GAP.
3. Press the d button to highlight
PAGE LINE.
4. Press the
Menu button.
5. Press the d button to highlight
ON.
6. Press the button to save the setting. An asterisk appears next to
ON.
7. Press the Pause button to exit the menu.
You can also specify trim lines from your printer driver software. For
instructions, see page 90 (Mac OS X) or page 105 (Windows).
Using Cut Sheet Paper
You can print on many types of cut sheet paper and other media.
The printer accepts sheets ranging from letter size to 24 inches wide (7800)
or 44 inches wide (9800).
You can leave your roll paper on the spindle when you print on cut sheets;
make sure it is removed from the paper path and rolled up.
If you’re using stock thicker than 19 mil (0.5 mm), load it as described on
page 67.
If you’re loading small sheets or fine art paper, see page 66.
7800-9800Guide.book Page 64 Monday, April 10, 2006 11:59 AM
