A SERVICE OF

logo

5-145
Maintaining and Transporting the Printer | 145
4. Reinstall the carriage locking bracket and screw that were removed
during setup, as shown below.
5. Remove the printer from the stand. First make sure the casters are
locked and the two stabilizer knobs are touching the floor.
6. Remove the two wing nuts and lock washers securing the printer to the
stand (underneath the printer). Keep them in a safe place.
Tip: For more secure
transportation, tape all
doors and covers shut.
Caster lock
Stabilizer knob
7800-9800Guide.book Page 145 Monday, April 10, 2006 11:59 AM