Cleaning
the
Printer
To keep your printer operating at its best, you should clean it
thoroughly several times a year.
1.
2.
3.
4.
5.
Make sure the printer is turned off.
Remove any paper from the paper feeder.
Use a soft brush to carefully brush away all dust and dirt.
If the outer case or the inside of the paper feeder is dirty,
clean it with a soft, clean cloth dampened with mild
detergent. Keep the printer cover closed to prevent water
from getting inside the printer.
If the inside of the printer accidentally gets soiled with ink,
wipe it off with a damp cloth.
q
Caution:
Ll
Never use alcohols
or
thinners to clean the printer;
these chemicals can damage the components as well as
the case.
0
Be careful not to get water on the printer mechanism
or
electronic components.
U
Do not use a hard or abrasive brush.
CI
Do not spray the inside of the printer with lubricants;
unsuitable oils can damage the mechanism. Contact your
dealer or a qualified service person
@lubrication is needed.
Transporting the Printer
If you need to transport your printer some distance, carefully
repack it using the original box and packing materials as
follows:
1.
Open the printer cover and make sure that the print head is
capped in the far right position. If the print head is not
capped, turn on the printer to cap it. Then, turn off the
printer.
3-4
Maintenance and Troubleshooting
