Note:
U
The printer
has
a minimum and maximum loading position.
If
you try to move the loading position beyond these
limits,
the
printer beeps and the paper stops moving.
3
When the
paper
reaches the
factory-set
loading position, the
printer beeps. Use the factory setting as a reference point
when
adjusting the loading position.
Adjusting the print position
The print position is the position on the page where the print
head actually prints during a print job. If you want to change
the current print position, you can use the micro-feed feature as
follows:
1.
Press the
PAUSE
button to stop printing; the
PAUSE
light
comes on.
2.
Hold down the
ALT
button and press the
ECONOMY/
CONDENSED
(up)
or
FONT
(down) button to adjust the
print position on the page.
3.
Press the
PAUSE
button again to resume printing. (You may
have to experiment a few times to get the results you want.)
Note:
The printer has a limit
-
8.0
mm
(0.31
inch)
-
to the amount you
can move the print position backwards using microfeed. Feeding
stops when you reach this limit.
2-10
Using
Other
Printer Functions
