EPL-N2700 Revision A
Product Description External Interface Specifications 30
1.3.4 Ethernet I/F
I/F type: 10BaseT, 100BaseT, Half Duplex, Full
Duplex (Switched at power on)
Communication protocol:
IPX/SPX (IPX, SPX, NCP, RIP, SAP, PrintServer,
RemotePrinter, NDS, SNMP)
NetBIOS (SMB)
NetBEUI
TCP/IP (IP, UDP, TCP, LPR, FTP, TELNET, APR, ICMP,
RARP, BOOTP, DHCP, SNMP, HTTP)
AppleTalk (ELAP, DDP, ATP, PAP, AARP, NBP, ZIP, RTMP)
(When AppleTalk is used, items such as printer name must be
set on the Web browser. EPSON Net and EPSON Net2 can not
be used.)
Connector: RJ45
Applicable cable: 2-pair category 3, 4 or 5 UTP (10BaseT,
100BaseT)
(To conforms with ECC Class B, EN55022
Class B, VCCI Class B, a shielded cable must
be used.) (TBD)
Pin assignment: See Table 1-20.
Table 1-20. Ethernet I\F Pin Assignment
Pin Signal Name I/O
1Tx+ O
2Tx- O
3Rx+ I
4N.C.
−
5N.C.
−
6 Rx- I
7N.C.
−
8N.C.
−
