Testing the Printer
Selecting and printing a status sheet or test print
To select and print a status sheet or test print, you must enter
SelecType. The printer has two SelecType levels; the status sheet
feature is in SelecType Level 1 and the test-print feature is in Level 2.
The level selected depends on the amount of time you hold down
the
SelecType
button.
Note: For a complete description of SelecType levels and
functions, including Level 2 test prints, see Chapter 4. You may
also use the Quick Reference card located at the back of this
manual.
Selecting and printing a status sheet
A status sheet lists the current printer settings.
1.
Make sure that your printer is turned on.
2.
Press the
SelecType
button until SelecType LEVEL1 appears.
Note:
If you have used SelecType before, and if the printer is set up
to use more than one channel, the following option appears on
the display at step 2:
CANCEL : < S : P: O : >
Press or to choose your channel. Then go on to
step 3.
2-8
Testing and Connecting Your Printer
