A SERVICE OF

logo

EPSON Imaging Technology Center Page: 39
Revision: 1 10/6/00
6.18 Select color “ESC (r nL nH m n”
Format:
ASCII ESC ( r nL nH m n
Hex 1B 28 72 nL nH m n
Decimal 27 40 114 nL nH m n
Range of Values for Parameters:
nL=02H, nH=00H
m=00H,01H
n=00H, 01H, 02H, 04H
Function:
1) The print color is selected according to the values of m and n.
m n Print color
00H 00H Black
00H 01H Magenta
00H 02H Cyan
00H 04H Yellow
00H 01H Light Magenta
00H 02H Light Cyan
2) If either m or n has a value other than those above, this command is ignored.
3) This command is only effective in graphics mode.
Initial State: Black is selected.
Related Commands:
Commands related in the direction of applying an effect (Setting)
None
Commands related in the direction of receiving an effect (Setting)
The ESC @ command selects black.
Commands related in the direction of applying an effect (Operation)
None
Commands related in the direction of receiving an effect (Operation)
The ESC (G command sets graphics mode.