CyberData Corporation 930181B Operations Guide
Installing the VoIP Intercom
Upgrade the Firmware and Reboot the Intercom
24
2.4 Upgrade the Firmware and Reboot the Intercom
To upload the Intercom firmware from your PC:
1. Set up a TFTP server.
If you do not already have a TFTP server r
unning on your network, see Appendix B, “Setting up
a TFTP Server”.
2. Retrieve the latest Intercom firmware from the CyberData website:
ht
tp://www.cyberdata.net/support/voip/intercom.html
3. Unzip the Intercom version file. This file may contain th
e following:
• Firmware file: 100-uImage-intcm
• Release notes
4. Copy the firmware files to be upgraded to the
appropriate TFTP server directory:
• c:\tftp-root\for Windows
• /tftpboot/for Linux
5. Log in to the Intercom home page as instructed in Section 2.3.1, "Log in
to the Configuration
Home Page".
6. Click the U
pgrade Firmware button to open the Firmware Upgrade page. See Figure 2-18.
Figure 2-18. Firmware Upgrade Page
7. Enter the IP address of your TFTP serve
r into the TFTP Server IP parameter field.
