24 DXZ848RMC
English
Setting a recording mode
The recording mode for MUSIC CATCHER can
be switched between the following 2 modes:
• HQ (High Quality) MODE: about 265 minutes
• LP (Long Play) MODE: about 353 minutes
∗ The factory default setting is “HQ”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“MC-REC MODE”.
3. Turning the [ROTARY] knob clockwise or
counterclockwise and select “HQ” or “LP”.
4. Press the [T] button to return to the previous
mode.
Setting RDS interrupt during
recording
The RDS or DAB interrupt function can be
switched on or off during recording using MU-
SIC CATCHER.
∗ The factory default setting is “OFF”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“RDS-INT REC”.
3. Turning the [ROTARY] knob clockwise or
counterclockwise and select “ON” or “OFF”.
● ON:
When “ON” is selected, recording is sus-
pended at the occurrence of an RDS inter-
rupt during recording. (The output is switched
to RDS audio.)
● OFF:
When “OFF” is selected, recording continues
even at the occurrence of an RDS interrupt
during recording. (RDS audio is not output.)
Notes:
• At the occurrence of an emergency broadcast
(alarm interrupt), recording is suspended even
when RDS interrupt is set to “OFF”.
• When TEL interrupt is set to “ON”, recording is
suspended even when RDS interrupt is set to
“OFF”. To avoid this, set the “TEL-SWITCH” set-
ting to “OFF” or disconnect the cellular phone
from the unit.
∗ For details on “Cellular phone interrupt setting”,
refer to the section “Operations Common to Each
Mode” of each owner’s manual.
MUSIC CATCHER Operations
4. Press the [T] button to return to the previous
mode.
Notes on recording using MUSIC
CATCHER:
• Recording operations are to be performed in
the CD/MP3 mode.
• Recordable media are CD-DAs only.
• Discs (CD-R/CD-RW) created by copying on a
music recorder cannot be recorded.
• MP3/WMA discs cannot be recorded.
• Some CDs may show a subtractive time indi-
cation in the area between tracks when they
are played back. A between-tracks area is not
recorded in such a CD.
• In recording using MUSIC CATCHER, some
amount of silent time is created between the
tracks.
• If the disc contains some tracks that have
been already recorded, the other tracks are
recorded.
• Folder and file names are added automatically
during recording. These folder and file names
cannot be changed. (The file names corre-
spond to the track Nos. on the CD.)
• If the disc is not recordable, “NO REC DISC”
shows on the display.
• If the disc contains some tracks previously re-
corded, “INCLUDED” shows on the display.
• If there is no empty folder available, “FOLDER
FULL” shows on the display.
• When the memory capacity is used up,
“MEMORY FULL” shows on the display and
recording is canceled.
• Recording cannot be performed during SCN,
RPT, and RDM. In such cases, “BUSY” shows
on the display.
• The [ ], [a], [d], [BND] and [SCN/PRT/
RDM] buttons are invalid during recording.
When these buttons are pressed, “INVALID”
shows on the display.
Recording operation (REC function)
Recording using MUSIC CATCHER is per-
formed in the CD/MP3 mode and the following 2
recording modes are available: “TRACK REC” to
record only one track currently being played
back and “DISC REC” to record all tracks on the
CD.
