Implementing NTP on Cisco IOS XR Software
Additional References
SMC-191
Cisco IOS XR System Management Configuration Guide
Updating the Hardware Clock: Example
The following example shows an NTP configuration in which the router is configured to update its
hardware clock from the software clock at periodic intervals:
!
ntp
server 10.3.32.154
master 6
update-calendar
!
Additional References
The following sections provide references related to implementing NTP on Cisco IOS XR software.
Related Documents
Standards
MIBs
Related Topic Document Title
Cisco IOS XR clock commands Clock Commands on Cisco IOS XR Software module of
Cisco IOS XR System Management Command Reference,
Release 3.3.0
Cisco IOS XR NTP commands NTP Commands on Cisco IOS XR Software module of the
Cisco IOS XR System Management Command Reference,
Release 3.3.0
Cisco IOS XR getting started material Cisco IOS XR Getting Started Guide, Release 3.3.0
Cisco IOS XR master command index Cisco IOS XR Commands Master List, Release 3.3.0
Information about user groups and task IDs Configuring AAA Services on Cisco IOS XR Software module of the
Cisco IOS XR System Security Configuration Guide, Release 3.3.0
Standards Title
No new or modified standards are supported by this
feature, and support for existing standards has not been
modified by this feature.
—
MIBs MIBs Link
There are no applicable MIBs for this module. To locate and download MIBs for selected platforms using
Cisco IOS XR software, use the Cisco MIB Locator found at the
following URL:
http://cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
