Configuring Presence Service
How to Configure Presence Service
888
Cisco Unified Communications Manager Express System Administrator Guide
OL-10663-02
• Verifying Presence Configuration, page 897
• Troubleshooting Presence, page 898
Enabling Presence for Internal Lines
Perform the following steps to enable the router to accept incoming presence requests from internal
watchers and SIP trunks.
Restrictions
• A presentity can be identified by a directory number only.
• BLF monitoring indicates the line status only.
• Instant Messaging is not supported.
SUMMARY STEPS
1. enable
2. configure terminal
3. sip-ua
4. presence enable
5. exit
6. presence
7. max-subscription number
8. presence call-list
9. end
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
sip-ua
Example:
Router(config)# sip-ua
Enters SIP user-agent configuration mode to configure the
user agent.
