2-43
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Chapter 2 Illustrated Card List for MGX Switches and the MGX 8880 Media Gateway
Front Cards
The MPSM-16-T1E1 card supports the features as summarized in Table 2-21.
Table 2-21 MPSM-16-T1E1 Supported Feature Summary
Feature Grouping Description
General
• Support for SPVCs, SVCs, SPVPs and PVPs.
• Maximum of 2000 connections supported. Any combination of Frame Relay
and ATM connections is allowed.
• Support for FR-FR, FR-ATM, ATM-FR, ATM-VISM, SPVC connection types,
where one of end-points resides on the MPSM-16-T1E1 card.
• Support for OAM fault management.
• Support for statistics collection and upload to Cisco Wan Manager (CWM).
• Support for configuration upload to CWM.
• 1:1 hot standby redundancy plus standard MGX RAS features.
• 1:N cold standby redundancy
• Connections provisioned on PNNI control plane on the MGX 8850 platform
using the MSF switch architecture based VSI (Virtual Switch Interface).
• Provisioning XPVC endpoints supported on this card.
• Licensing of the features supported by card.
Supported
Services
• Frame Relay
• ATM
• Inverse Multiplexing for ATM (IMA)
• Any Service Any Port (ASAP)
Physical Layer
• Physical interfaces configurable as channelized or unchannelized ports for:
–
16 T1 connections
–
16 E1 connections
• Fault management and performance management for T1 and E1 interfaces.
• BERT support.
