30
System > System Setting
The System Setting includes IP Information and System information.
By default DHCP is disabled. If DHCP is disabled, the IP Address,
Subnet Mask and Gateway can be manually configured. By entering
a System Name and System Location, the device can more easily be
recognized through the SmartConsole Utility and in other Web-Smart
devices on the LAN. The Login Timeout controls the idle time-out
for security purposes, when there is no action in the Web-based Utility.
When the Login Timeout expires, the Web-based Utility requires a re-
login before using the Utility again.
Figure 23 – System > System Setting
System > Trap Setting
A Trap Setting allows the Web-Smart Switch to monitor Trap
information through the Web-based Utility of an IP address on the
LAN. By default, Trap Setting is Disabled. When the Trap Setting is
