A SERVICE OF

logo

24
Firmware Upgrade: When the device firmware is be upgraded, enter
the Firmware path and password (if necessary) to update.
Figure 12 – Firmware Upgrade
Web Access: Double click the device in the Monitor List or select a
device in the Monitor List and press the “Web Access” button to open
the Web-based Utility. To see the list of web browsers the Web-based
Utility supports, see Supported web browsers on page 20.
DHCP Refresh: select a device in the Monitor List and press the
DHCP Refresh”, and enter the password (if applicable) to trigger
the Web-Smart Switch to request an IP address from a DHCP Server.
Figure 13 – DHCP Refresh