Configuring Token Ring Inter-Switch Link
TRISL Configuration Examples
BC-159
Cisco IOS Bridging and IBM Networking Configuration Guide
78-11737-02
IPX Routing Non-Source-Routed Frames Between a TRISL VLAN and a Token
Ring Interface Example
Figure 59 shows IPX routing non-source-routed frames between a TRISL VLAN and a Token Ring
interface.
Figure 59 IPX Routing Non-Source-Routed Frames Between a TRISL VLAN and a Token Ring
Interface Example
The following is the configuration for the router:
ipx routing
interface TokenRing 3/1
ipx network 1
!
interface fastethernet4/0.1
ipx network 10
encapsulation tr-isl trbrf 999 bridge-num 14
The following is the configuration for the Catalyst 5000 switch with the Token Ring switch module in
slot 5. In this configuration, the Token Ring port attached to ring 1 is assigned to the TrCRF VLAN 40.
#vtp
set vtp domain trisl
set vtp mode server
set vtp v2 enable
#drip
set tokenring reduction enable
set tokenring distrib-crf disable
#vlans
set vlan 999 name trbrf type trbrf bridge 0xe stp ieee
set vlan 40 name trcrf40 type trcrf parent 999 ring 0x1 mode srt
#add token port to trcrf 40
set vlan 40 5/1
set trunk 1/2 on
5500
51886
Fast Ethernet 4/0.1
etwork 1
Network 10
Catalyst 5000 switch
Token Rin
switch
module
TrCRF VLAN 4
Slot 5
Port 1
TrBRF 999/Bridge 14
End station
Token
Ring 1
End station
End station
Token
Ring 2
