Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem 7
About this guide
This guide provides information about setting up and configuring the Cisco MDS 9124e Fabric
Switch for HP c-Class BladeSystem. Throughout this guide the short product name is used, Cisco
M DS 9124 e Swit ch.
Intended audience
This guide is intended for system administrators and technicians with knowledge of:
• Configuration aspects of customer Storage Area Network (SAN) fabric
• Customer host environment, such as Microsoft Windows or Linux
• Command Line Interface (CLI) commands
• Cisco Fabric Manager graphical user interface (GUI) for configuring the switches through a
supported web browser
Related documentation
IMPORTANT:
For late breaking, supplemental information, access the latest version of the product release notes.
Contacting HP Technical Support
Be sure to have the following information available before you call HP:
• Technical support registration number (if applicable)
• Product serial number
• Product model name and number
• Applicable error messages
• Third-party hardware or software
• Operating system type and revision level
For continuous quality improvement, calls may be recorded or monitored.
HP contact information
For the name of the nearest HP authorized reseller:
• In the United States, see the HP US service locator web page:
http://www.hp.com/service_locator
• In other locations, see the Contact HP worldwide (in English) web page:
http://welcome.hp.com/country/us/en/wwcontact.html
