A SERVICE OF

logo

3-7
Cisco Catalyst 4900M Switch Installation Guide
78-18350-01
Chapter 3 Installing the Switch
Rack-Mounting the Switch
Note Some equipment racks provide a power strip along the length of one of
the rear posts. If the rack has this feature, consider the position of the strip
when planning fastener points. Before installing the L brackets on the
chassis, determine whether to install the chassis from the front or the rear
of the rack.
Attach the left and right L brackets using the four M4 Phillips pan-head screws
provided in the rack-mount kit. (See
Figure 3-2.) Then slide the rear bracket into
the front bracket.
Figure 3-2 Attaching the L Brackets to the Switch
232125
202519