3-17
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-03
Chapter 3 Getting Started with CMS
Menus and Toolbar
Cluster
Cluster Manager
3
Launch a CMS session from the command switch.
Create Cluster
1
4
Designate a command switch, and name a cluster.
Delete Cluster
1
5
Delete a cluster.
Add to Cluster
1
5
Add a candidate to a cluster.
Remove from Cluster
1
5
Remove a member from the cluster.
Standby Command Switches
2
5
Create a Hot Standby Router Protocol (HSRP) standby group to provide command-switch
redundancy.
Hop Count
2
5
Enter the number of hops away that a command switch looks for members and for
candidate switches.
Device
Device Manager
5
Launch Device Manager for a specific switch.
Host Name
1
Change the host name of a switch.
STP
2
Display and configure STP parameters for a switch.
IGMP Snooping
2
Enable and disable Internet Group Management Protocol (IGMP) snooping and IGMP
Immediate-Leave processing on the switch. Join or leave multicast groups, and configure
multicast routers.
ACL
2
(guide mode available
1
)
Create and maintain access control lists (ACLs), and attach ACLs to specific ports.
Security Wizard
1
Filter certain traffic, such as HTTP traffic, to certain users or devices.
QoS
2
(guide mode available on some
options
1
)
Display submenu options to enable and disable quality of service (QoS) and to configure
or modify these parameters:
• Trust enable/disable
2
• Trust settings
2
• Queues
2
• Maps
2
• Classes
2
(guide mode available
1
)
• Aggregate policers
2
(guide mode available
1
)
• Policies
2
(guide mode available
1
)
• Statistics
2
IP Routing
2
6
(guide mode available
1
)
Display submenu options to configure or modify these parameters:
• Protocols
2
(guide mode available
1
)
• Static routing
2
(guide mode available
1
)
• Equal- and unequal-cost routing
2
(guide mode available
1
)
IP Multicast Wizard
1
6
Provide minimum information to configure IP multicast routing on a device so that it can
forward multicast packets as a part of a multicast tree.
IP Multicast Routing
2
6
Enable and configure multicast routing.
Table 3-10 Menu Bar (continued)
Menu-Bar Options Task
