A-1
Cisco Catalyst Blade Switch 3130 for Dell Software Configuration Guide
OL-13270-01
APPENDIX
A
Supported MIBs
This appendix lists the supported management information base (MIBs) for this release on the switch. It
contains these sections:
• MIB List, page A-1
• Using FTP to Access the MIB Files, page A-4
MIB List
• BRIDGE-MIB
Note The BRIDGE-MIB supports the context of a single VLAN. By default, SNMP messages
using the configured community string always provide information for VLAN 1. To obtain
the BRIDGE-MIB information for other VLANs, for example VLAN n, use this community
string in the SNMP message: configured community string @n.
• CISCO-CABLE-DIAG-MIB
• CISCO-CDP-MIB
• CISCO-CONFIG-COPY-MIB
• CISCO-CONFIG-MAN-MIB
• CISCO-DHCP-SNOOPING-MIB
• CISCO-ENTITY-FRU-CONTROL-MIB
• CISCO-ENTITY-VENDORTYPE-OID-MIB
• CISCO-ENVMON-MIB
• CISCO-ERR-DISABLE-MIB
• CISCO-FLASH-MIB (Flash memory on all switches is modeled as removable flash memory.)
• CISCO-FTP-CLIENT-MIB
• CISCO-HSRP-MIB
• CISCO-HSRP-EXT-MIB (partial support)
• CISCO-IETF-IP-MIB (Only with the IP services and advanced IP services feature set)
• CISCO-IETF-IP-FORWARDING-MIB (Only with the advanced IP services feature set)
