A SERVICE OF

logo

Printing Maintenance
27
4.
Click the Cleaning button.
5. Click OK. The printer will clean the
printhead.
6. When done, click Close.
7. After the cleaning, print a nozzle
check pattern to check the results.
See “Printing a Nozzle Check
Pattern” on page 24.
8. If there is no change after cleaning, check the amount of ink remaining. If an
ink tank is empty, replace it. See “Monitoring Ink Levels” on page 21.
S900_QSG.book Page 27 Friday, November 2, 2001 1:34 PM