Treating Operation (continued)
20.0
3. When drum rotation stops,
turn the Drum Rotation Switch to
R (CLEAN OUT) and turn
the Drum Switch to ON and run the drum until it is empty.
Control Box panel
5. Turn the Drum Switch to OFF,
then the Drum Rotation switch to the OFF position.
Wait for the drum to stop, then switch the drum rotation to
F (TREAT) for the next treating job.
Before treating other crops or varieties,
ensure all switches are set to the
OFF position. Inspect the
entire seed system and treater. Be sure it is clean to avoid
contamination of other seed sources.
If the HCBT will not be used for a while,
any liquid treatment you intend to continue using and that
you have diluted with water may settle in the CBP tank, so
continue to operate the agitator.
If the machine will not be used for a long time,
drain the premix tank (refer to page 21.0, maintenance).
Control Box panel
