47
5.5.1.3 Storing an iris table
(‘TBL STORE’)
After assigning the T-stops the resulting iris table can be
stored for later use.
• Press the MODE button in the submenu for assigning
the T-stops to go back to the table menu (TBL LOAD,
TBL DEL, TBL EDIT, TBL STORE).
• Turn the handwheel until ‘STORE’ is shown in the
second line.
• Press the SEL button. ‘STORE’ is displayed in the first
line, and the number of the memory area is shown in
the second line.
• Select the number of the required memory area using
the handwheel. 10 memory areas are available.
When storing, existing table data in this
memory area are overwritten without warning!
• The iris table is stored by pressing the SEL button.
‘DONE’ is displayed for one second.
• Note down the number of the memory area together
with the programmed lens to simplify activating lenses
at a later time.
Controlling the Iris
