Page 12
Using the Night-Light Timer (continued)
3. Tap the LIGHT key once quickly to move to the third and
final step. The night-light CHANGE time (6:00am by
default) appears. The change or “OK to Wake!” time is the
time at which the night-light color changes from yellow to
green. This time may also be adjusted.
4. Tap the LIGHT key once more to exit the night-light timer
setup sequence. Upon exiting, Teach Me Time!
automatically places the night-light in timer mode (
icon
appears).
Disabling Color Changing Of The Night-Light Timer
You may prefer to have the night-light turn on and off
automatically but not change color. In order to disable the color-
change transition do one of the following:
1. Set the CHANGE time equal to the ON time. In this case
the night-light turns on (yellow) at the ON time and off at
the OFF time. It does not change color.
2. Set the CHANGE time equal to the OFF time. In this case
the night-light turns on (green) at the ON time and off at
the OFF time. It does not change color.
In either case, if the CHANGE time is disabled, a small “x”
appears in the center of the light bulb icon during timer setup (this
“x” is not seen during ordinary operation):
TIP: The CHANGE (to
green) time may not be
adjusted beyond the
night-light ON (yellow)
time and the night-light
OFF extremes.
Teach Me Time!
automatically enforces
this and it is the reason
that the ON and OFF
times are set first and the
CHANGE time is set last.
