46 Chapter 2
Chipset Settings
The Chipset Settings will be shown only if you press
Alt + F4
in main menu:
Press Enter
to view the Chipset settings information.
The following screen displays the Chipset settings menu:
Plug and Play OS Set to
Yes
if the computer is running on Win95/
Win98 or Win2000. For any other OS, set to No.
Yes
or No
Reset Resource
Assignments
When enabled, avoids IRQ conflict when installing
non-PnP and PnP PCI cards. This clears all
resource assignments and allows BIOS to reassign
resources to all installed PnP devices the next time
the system boots.
Yes or
No
After clearing the resource data, it
is recommended that you reset
the parameter to its default, i.e.,
No.
Parameter Description Options
Advanced Options
!
Memory/Cache Options
!
PnP/PCI Options
!
*Chipset Settings
Chipset Settings
Spread Spectrum .........................................[ Enabled ]
Memory Stable Register..............................[ Enabled ]
RIMM TRDLY value..................................[ Auto ]
ICH Audio Controller..................................[ Enabled ]
ICH Modem Controller ...............................[ Disabled ]
Delay Transaction ....................................... [ Enabled ]
