3 - 20 Ethernet RMON MultiProbe Module Installation and Operation Guide
The RMON MultiProbe Module uses the information in this string to adjust
the bps rate of the serial interface once you establish a modem connection.
No Connect Response - An ASCII string that contains response codes
generated by a modem to report the reason for a connection attempt
failure. The response codes are delimited by the first character in the string.
For example:
/NO CARRIER /BUSY/NO DIALTONE/NO ANSWER/ERROR/
If the RMON MultiProbe Module receives one of the response codes on its
serial interface while attempting to make a modem con nection, the module
issues the hangup command as specified by modem Hangup String.
Using the Modify/View Network Settings Menu
Use the Modify/View Network Settings menu to:
❑ Display the Modify/View Network Interface Settings menu for each
interface
❑ Display and modify the module default gateway
❑ Display and modify the BOOTP network interface
To display this menu, select option 1 from the Modify/View Configuration
Values menu.
