Console Port B-9
If you are doing this via a modem you have to redial to the
AccessBuilder unit if the modem on the console port was not set to
ignore DTR.
5 After system reset, type the following command to start xmodem
downloading in nindy:
C> do;start xmodem downloading
6 Insert the “AccessBuilder server software” diskette (to be download)
into the PC. Within the Windows Terminal emulator, click the “Send
Binary File...” item under the “Transfer” menu, and then select the file
(usually, it is a file called “
absrvr.cf0”. At this time a progress meter
appears to show the status of downloading.
7 After the progress meter disappears, the xmodem downloading is
completed if you get no error messages reported; otherwise, you will
need to repeat steps 4 and 5. If not successful after several repeats,
type the commands “
ch” and “rs” (as in step 7) to reset the system to
its original state.
8 Press the “Enter” key to get the “C>” prompt in nindy, then type the
following commands to complete upgrading:
C> ef;erase flash rom
C> uf;update flash rom
C> ch;clear header
C> rs;restart
The system will reset and the AccessBuilder server resumes normal
operation.
The software upgrade is now complete. If you have any problems call
3Com technical support at 1-800-NET-3COM.
ab4kbook Page 9 Thursday, March 27, 1997 11:51 AM
