Hardware Installation 2-7
Hardware
Installation
The following is a step-by-step procedure for performing the
AccessBuilder 4000 hardware installation.
Stand Alone Pick a suitable location for the AccessBuilder 4000. Either a desktop or
similar level surface may be used. You may also want to locate the
modems near the unit. Be sure there are no obstructions on the sides
of the AccessBuilder to permit adequate airflow for cooling.
Rack Mounting If rack mounting is desired, attach the rack adapter ears (included) as
show in Figure 2-2. The AccessBuilder 4000 requires 1.5 RU (rack unit)
of height in the rack. Be sure there are no obstructions on the sides to
permit adequate airflow for cooling.
Figure 2-2 Rack Ears Installation
AccessBuilder
4000
PowerPower
StatusStatus
ActivityActivity
SYSTEM STATUSSYSTEM STATUS
ab4kbook Page 7 Thursday, March 27, 1997 11:51 AM
