Yamaha Soavo-2 Portable Speaker User Manual


  Open as PDF
of 6
 
4 En
<Bi-wired connections>
When connecting the speaker cable, you must remove the jumper cable.
SPEAKERS
A
B
L
R
++––
SPEAKERS
L
R
++– –
Red (+)
Black (–)
Woofer terminals
Soavo-2 (R) Soavo-2 (L)
Amplifier
Jumper cable
Amplifier
Soavo-2 (R) Soavo-2 (L)
Tweeter terminals
Both SPEAKERS A and
B should be connected.
When your amplifier has two sets
of speaker output terminals.
When your amplifier has only one
set of speaker output terminals.
To connect the speaker to the output
terminals of the amplifier, two pairs
of cables for each of the woofer and
the tweeter are used instead of
standard connections. This type of
connection decreases the
modulation distortion caused by
electric resistance of the cables and
driving current of the speakers.
Consequently, purer sound quality
can be expected.
When using a banana plug
1 Unscrew the terminal knob.
2 Remove the cover by pulling it toward you.
3 Tighten the terminal knob.
4 Simply insert the banana plug into the terminal.
2
1
3
4
Banana plug
Terminal
 previous next