Filter
Top Products
08905180X1 - 5 -
BASE STATION – REAR VIEW
BASE STATION
3 Video Format This selector switch is used to select NTSC or PAL format.
4 IR IN Modulated IR input use to connect to a Xantech IR bus system.
5 RS232/422 Port to connect to RS232 or RS422 communications devices. To change
between 232 and 422, use the on-screen ‘settings’ menu.
6 Component Out Component video output to be connected to a display.
7 A/V Output Composite video and Left & Right Audio output Use included cable adaptor
to break-out RCA connections. Audio output is always active. Composite
and component video selection is made using the on-screen ‘settings’
menu. Only one video format can be active.
8 Power In Power input using wall adapter power supply.