Filter
Top Products
Sleep Operation
Dimmer Operation
Making Calls with a Bluetooth Mobile Phone
8
P11
Before you make a call with the iP47, you need to pair and link your Bluetooth-enabled phone with iP47. Please refer
to Pairing procedure on page 7.
Answer a Call:
1. To answer a call, press the Button. Now you can use the iP47 as a speaker phone.
2. Speak into the MIC (located below the Snooze/Dimmer Button) and press the or Button on the iP47 or on the
remote control to adjust the call volume.
3. To end the call, press the Button.
Dial/Re-dial Dialing:
1. Once the iP47 is paired to a Bluetooth mobile phone, you can use the integrated keypad or the remote control to enter
a phone number.
2. Input a phone number in normal operation mode (you do not need to be in Bluetooth mode) then press the Button.
Press the Clear Button to cancel the last digit entered or press and hold Clear to cancel all digits. Press the Button
to cancel the call.
3. To redial the last dialed number, press the Button twice (x2).
4.
Press the or Button on the iP47 or on the remote control to adjust the call volume. NOTE: The iP47 has
separate volume settings for phone operation which don’t affect the volume of other modes.
5. To end a call, press the Button.
Ringer Volume Select:
1. To select iP47 ringing volume, press the Ringer Vol. Button on the keypad to select to Hi, Mid, Low or Off.
Sleep mode lets you sleep to iPod, Bluetooth music or the radio, gradually lowering the volume until the unit shuts off at
the selected time.
1. Press the Sleep Button to enter sleep mode. The Sleep Icon will appear on the display to indicate it is sleep mode. The
unit will automatically turn off after the selected time. Sleep mode has a Gentle Sleep feature which gradually lowers
the volume.
2. You can adjust the sleep timer from 120, 90, 60, 30 or 15 minutes by pressing the button again.
3. When the display changes back to show the real time, press the Sleep Button once will show the sleep time remaining.
Pressing it again will change sleep time to next lowest increment.
4. iP47 has independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the alarm
volume. Press the
or Button on the iP47 or on the remote control to adjust the system volume. The sleep
volume will remain at that level the next time you enter sleep mode until controls are changed.
5. To stop listening at any time, press the Alarm Reset/Power On/Off Button on the iP47 or on the remote control to turn
it off.
During normal operation, press the Snooze Button to control the brightness of the LCD display.