Filter
Top Products
Using Repeater Channels (FM Only)
The Signal coming from your radio is received by the Repeater Station and then retransmitted at the same time
on another channel. This operation is called "Duplexing".
For example,
CH01 on Duplex Mode will Receive on CH 01 but Transmit on CH31
CH02 on Duplex Mode will Receive on CH 02 but Transmit on CH32 etc ....
If you transmit on CH01 Duplex mode, you are actually transmitting on CH31, the repeater station down-converts
your signal and retransmits on CH01.
Operating the UH-090 in Duplex Mode
For this example we are adopting CH01 as the channel being used in your area for repeater use.
UNIDEN Model UH-090 Dual Band CB Radio (FM & AM)
Operation
Press and hold for 2 seconds to switch
Duplex On. The DUP icon appears.
Press and hold again for 2 seconds to switch
Duplex off.
Only channels 01 - 08 are available for Duplex
MEM
MEM
CTCSS
FM/AM
SCAN
DUAL
OS/GS
MEM INST
INST SET
DUP
FM SQ
FM
S/RF
VOL
DUP
8
SQ
VOL
NOTE
Check with your loacl Retailer for
information on available Repeaters
Scanning
The UH-090 has a scanning feature that allows you to search for active channels automatically.
Furthermore, the UH-090 is designed to have two types of scanning; Open Scanning (OS) and Group Scanning
(GS), to give you flexibility and allow you to use the radio more effectively.
Press and Scanning starts. The SCAN
icon appears.
CTCSS
FM/AM
SCAN
DUAL
OS/GS
MEM INST
INST SET
DUP
FM SQ
FM
MEM
S/RF
VOL
SCAN
SCAN
SQ
VOL