Filter
Top Products
Operating the uh089sx in Duplex Mode
For this example we are adopting CH01 as the channel being used in your area for
repeater use.
Press to switch Duplex On.
If Duplex is not required - press
again to switch Duplex off.
Only channels 01 - 08 are
available for Duplex.
The uh089sx has a scanning feature that allows you to search for active channels
automatically.
Furthermore, the uh089sx is designed
to have two types of scanning; Open
Scanning (OS) and Group Scanning
(GS), to give you flexibility and allow
you to use the radio more effectively.
Press and Scanning starts.
The icon appears.
The scan direction can be changed
at any time by rotating the channel
selector left or right.
Allows continuous scanning of all selected channels.
If an active channel is found, scanning will stop on that channel.
If the received signal ceases, the unit will wait 3
seconds for the signal to return, otherwise
scanning resumes.
To skip the active channel, press momentarily. Scanning resumes. To deactivate
SCAN, press or the PTT button on the microphone.
Check with your local Retailer for
information on available repeaters.
If SCAN is deactivated while on an active channel, the uh089sx will stay on
that active channel. If no channels are active, the uh089sx will reinstate the
starting channel.
Scanning
Open Scan (OS) Mode
SCAN
OS Mode is indicated by the absence of the GS icon.
UNIDEN Model uh089sx UHF CB Radio
Operation
8
MON
DCS/CTCSS
MON
DCS/CTCSS