Uniden UH089sx Portable Radio User Manual


 
UNIDEN Model uh089sx UHF CB Radio
Introduction
The Uniden uh089sx is designed to provide you with years of trouble free service. Its rugged
components and materials are capable of withstanding harsh environments. Please read this
Operating Manual carefully to ensure you gain the optimum performance of the unit
The following system checks should be made every six to twelve months:
Check the Standing Wave Ratio (SWR).
Inspect the tightness of all electrical connections.
Inspect the antenna coaxial cable for wear or breaks on the shielding.
Inspect the tightness of all screws and other mounting hardware.
Should the unit malfunction or perform poorly, follow these procedures:
Check the power cord and fuse.
Check the VOLUME control setting. Be sure the SQUELCH is
adjusted properly. Possibly the radio is over-squelched.
Check that the transmission line (coaxial cable) is
connector. Check that the antenna is fully extended for proper
operation. Check that all transmission line (coaxial cable) connections are secure and free of
corrosion.
The citizen band radio service is licenced in Australia by ACMA Radio-communications
(Citizen Band Radio Stations) Class Licence and in New Zealand by MED General
User Licence for Citizen Band Radio and operation is subject to conditions contained in
those licenses.
Blackening may occur on the Liquid Crystal Display if the uh089sx has been
subjected to extreme high temperature (above 60°C) . This is not a fault. Normal LCD
operation resumes when the temperature stabilizes back to standard operating
operating condition (0-55°C).
Features
Preventive Maintenance:
Troubleshooting:
=
=
=
=
If the transceiver is completely inoperative:
If there is trouble with receiving:
If there is trouble with transmitting: securely
connected to the ANTENNA
2
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
Transmit & Receive FM 40CH (UHF-CB, TX
Power 5W), Transmission is inhibited at
CH22 & CH23
LCD Display with Backlight
Signal Strength Meter
RF Power Meter
Speaker Audio Volume Level Meter
Instant Channel
One touch Instant Channel recalling
Duplex Capability (from CH01 - CH08 per
channel)
Group Scan and Priority Channel Watch
Open Scan
Scan Channel Memory On/Off separately
with Open Scan, Group Scan
Rotary Channel Select
Busy Channel Lock-out Function
Roger Beep Function On/Off
2 Different CallTones
38 Built-in CTCSS (Continuous Tone Coded
Squelch System) and 104 additional DCS
(Digital Coded Squelch) codes that are user
selectable
Variable Squelch Level adjust
Volume Control with Power On/Off Switch
VOX (Voice Activated Function)
10 Steps VOX Mic sensitivity adjustment