Turbosound TQ-445 Portable Speaker User Manual


 
user manual
QLight series
TQ series manual
page 13
Wall brackets are available for most Qlight™ series enclosures in different load ranges according
to the weight of the cabinet. Two examples are shown below: the WB-10 wall bracket with a TQ-
230 and the WB-20A with a TQ-310. Wall brackets can be dis-assembled to simplify installation and
are supplied with the necessary fixings (except wall fixings). Remove the countersunk screws in
the back of the box that correspond to the bolt hole pattern in the speaker plate, and attach it using
the bolts provided with the hardware. Mount the wall plate in the desired position using suitable
wall fixings. Locate the captive bolt on the speaker plate in the hole provided on the wall plate,
position and angle the loudspeaker for optimum room coverage and tighten the nylock nuts.
Ceiling brackets are available for the TQ-230, TQ-308, TQ-310
and TQ-315. As with Turbosound wall brackets, they can be
dis-assembled to simplify installation and are supplied with
the necessary fixings (except wall fixings). Remove the
countersunk screws in the back of the box that correspond to
the bolt hole pattern in the speaker plate, and attach it using
the bolts provided with the hardware. Attach the ceiling plate
using suitable fixings. Position and angle the loudspeaker for
optimum room coverage and tighten the nylock nuts.
WB-55A/TQ-310
WB-10/TQ-230