Filter
Top Products
user manual
LMS-D24/26
LMS-D2X user manual
Page 9
Front Panel Functions
2x 24 character
LCD
Input Signal
Indicators
Store and
Recall buttons
Channel Select
buttons
Parameter Edit
Encoders
Output Mute
buttons
Limiter
Indicators
Edit Parameter
Select buttons
• Input Signal Indicators – A set of three pairs of LED’s indicate signal present, +4dBu and
input clip for both channels. The signal present LED’s operate at approximately –40 dBu,
giving a useful indication of even relatively low input signal levels. The +4 dBu LED’s are
intended to show nominal operating level and can also be useful for setting system gain
structure. Clip LED’s warn the user of input overload and operate at +19 dBu.
• Program Store and Recall – these controls provide access to 45 presets. Pressing the
store button allows the user to name a preset and choose which memory location it will
be held in. Pressing store button again completes the process. The Recall function
operates in a similar way, pressing the recall button allows the user to select which preset
they require, pressing the button for a second time, then confirming, recalls the new DSP
settings. The unit allows the user to set up user programs with full access to all
parameters.
Note that presets cannot be stored or recalled when secure mode is activated.
• Channel Selection Buttons – the currently selected channel is displayed on the top left
hand corner of the LCD. Pressing the channel buttons scrolls through the available input
and output channels and finally through the utility functions and back to the default
screen. If operating a stereo-linked preset the channel name will indicate the channel
pairing. For example ‘A+B’ means both input A and B parameters. The name of the output
will be shown briefly at the top of the display when stepping onto an output.