Filter
Top Products
user manual
LMS-D24/26
LMS-D2X user manual
Page 2
QUICK REFERENCE
(LMS-D26 shown)
Display
The LCD displays preset and parameter information. At start up the display shows the default
screen with the memory location and name of the current preset on the lower line of text.
Channel Select Buttons
The currently selected input or output channel is shown in the top left corner of the display.
Pressing the channel select buttons scrolls through the available inputs and outputs. If operating
stereo linked the channel name will indicate the channel association. For example ‘CH A+B’ means
both input A and B parameters.
Edit Select Buttons
The name of the edit parameter is displayed in the bottom left portion of the LCD. Pressing the edit
select buttons moves through the available parameters for the current input or output.
Parameter Encoders
Up to three parameters are shown on the display. The parameter name is shown with its’ current
value below. Where appropriate parameters are grouped according to function for example centre
frequency, width and gain for parametric EQ. Turn an encoder clockwise to increase the value of a
parameter, or anti-clockwise to decrease it. Turning a knob rapidly will cause the action to
‘accelerate’, so the value changes more rapidly.
Mute Buttons
The LED’s next to the mute buttons indicate their current status. Pressing a mute button toggles
between the mute on and off.
Store Button
The unit has 45 memory locations and allows users to set up their own programs. To store a
preset in a location, press the store button and use the encoders to select the memory location and
name the preset. Pressing the store button again completes the task. Pressing any button other
than store during the process cancels the procedure.