Filter
Top Products
user manual
LMS-D4
LMS-D4 user manual
Page 10
Use the
‘NEXT’
‘NEXT’‘NEXT’
‘NEXT’
and
‘
‘‘
‘
BACK’
keys to navigate through the accessible user controls. Then when the
desired control appears on the display, use the the
‘SCROLL’
‘SCROLL’‘SCROLL’
‘SCROLL’
button to change the value as
displayed on the bottom row.
IMPORTANT: Check that the limiter and amplifier settings are correct and that mixer levels are
minimised before unmuting the LMS-D4.
Utilities
This menu gives access to three features as indicated below:-
Lock/unlock
Lock/unlockLock/unlock
Lock/unlock
Locking the unit will prevent any change of the system in use as well as editing any of the user
controls.
To lock the unit, a password of 3 digits has to be entered. Use the ‘NEXT’ and ‘BACK’ keys to
move from one digit to the other, and the ‘SCROLL’ button to edit each of the three values. Finally
press the ENTER’ key. To unlock the unit, simply follow the same procedure.
Clear User Setups
Clear User SetupsClear User Setups
Clear User Setups
This st
tt
tores the factory preset (default) values for the system currently selected. As a result any
change previously made to the user controls values will be cancelled.
Download from PC
Download from PCDownload from PC
Download from PC
A standard 9 pin RS-232 type connector is provided to facilitate the future implementation of
software downloads and future upgrades. To download new flash memory data this option must
be enabled.