Filter
Top Products
4. While files are being transferred to the MP320, the screen will display a “WRITE” message. After files
have been successfully transferred, the “READY” message will be displayed again.
5. If you choose to transfer files or folders to the computer, the MP320 will display a “READ” message
indicating that files are being transferred to the computer. After files have been successfully
transferred, the “READY” message will be displayed again.
NEVER unplug the MP320 during file transfer. Unplug the MP320 only when Windows informs
it is safe (see Disconnecting from a Computer) and the “READY” screen disappears.
Disconnecting from a Computer
Always follow the procedures listed below before you disconnect the MP320.
Removing the MP320 in Windows
®
Me, 2000, XP and Vista
1. Select the Hardware icon
in the system tray.
2. The Safely Remove Hardware pop-up window will appear. Select it to continue.
Figure 7. Safely Remove Hardware
3. A message window will appear stating: “The ‘USB Mass Storage Device’ device can now be safely
removed from the system.”
Figure 8. Safe to Remove Hardware
4. Unplug the MP320 from your computer.
Removing the MP320 in Mac
®
OS 10.0 or Later
1. Drag the Disk icon that corresponds to your MP320 into the trashcan.
2. Unplug your MP320 from the USB port
Removing the MP320 in Linux
®
Kernel 2.4 or Later
1. Execute unmount /mnt/MP320 to un-mount the device.
2. Unplug your MP320 from the USB port.
30