Filter
Top Products
29
Connecting the gigabeat
®
to Your PC
a Turn on the PC.
b Connect the AC adapter to the USB CRADLE, turn on the
gigabeat, and then connect the gigabeat to the USB CRADLE.
Refer to “Charging the built-in battery” (>p.24).
c Use the USB cable to connect the PC and the USB CRADLE.
Set the USB/LINE OUT switch of the USB CRADLE to “USB”.
The PC will automatically detect the USB CRADLE and the driver will be installed
automatically.
When a connection has been made to the PC for the first time, “Found New
Hardware wizard” may be displayed. Should this occur, please insert the supplied
CD-ROM into the CD-ROM drive of the PC. The required driver will be installed
automatically.