Filter
Top Products
49
Function setup
Audio Out Select
VCDDVD-V CD
Select the output sound format corresponding to your
system connection.
For details of sound recording systems, see
41
.
Analog 2ch:
Select when connected to a TV, or
Dolby Pro Logic or stereo system via
the analog audio jacks.
54
Bitstream: Select when connected to an amplifier
equipped with a Dolby Digital, DTS,
MPEG1 or MPEG2 decoder.
58
59
The player outputs digital audio
information in the bitstream format
when you play a DVD video disc
recorded in the Dolby Digital, DTS,
MPEG1 or MPEG2 recording system.
PCM: Select when connected to a 2 channel
digital stereo amplifier.
59
The player outputs sounds in the PCM
2ch format when you play a DVD video
disc recorded on the Dolby Digital,
MPEG1 or MPEG2 recording system.
E.A.M.
VCDDVD-V CD
You can obtain expansive virtual surround sound
effects from just two speakers.
Normal: Normal sound.
3D: To obtain expansive virtual surround sound
effects from just two speakers.
3D (Headphone):
To obtain expansive virtual surround sound
effects when using headphone.
Dialog: To control critical center channel
information to make dialogue more
intelligible (only when playing a DVD video
disc recorded on the Dolby Digital
recording system).
•To use this enhancement on sounds
output from the BITSTREAM/PCM jack,
be sure to set “Audio Out Select” to
“PCM.”
Note
Pressing the E.A.M. button on the remote control also
allows you to achieve the same setup.
37
D.R.C.
DVD-V
Turn on or off a function that makes faint sounds
easier to hear even if you lower the volume during
late hours playback.
D.R.C. = Dynamic Range Control
On : Dynamic range is reduced.
Off : Full dynamic range is maintained.
Notes
• This function works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Reduction may differ
depending on the DVD disc.
AUDIO MENU
E.A.M
D.R.C.
Audio Out Select
3D
3D (Headphone)
Dialog
Normal
06SD-P90DTSE_E_EU_P45-52 07/3/23, 11:1349